Service confirmé selon la zone à IstanbulDemandes en ligne à tout moment

Renovation & Contracting

Gypsum & Ceilings

Plasterboard partitions, suspended ceilings and cove lighting.

Galvanised metal suspended ceiling framework installed below a corrugated deck, ready for plasterboard

When do you need this?

A suspended ceiling is not only a decorative layer; it resolves services, lighting and an uneven soffit at the same time. We set out the supporting frame, the height it will take and the lighting layout before work starts, and note the use of moisture-resistant board in wet rooms as a separate scope item.

  • An uneven, cracked ceiling surface
  • No provision for downlights or cove lighting
  • Air-conditioning pipework and cables left exposed
  • A room that needs dividing to create a workspace
  • A plasterboard wall that has been knocked through

What this covers

01

Plasterboard partition walls

02

Flat and stepped suspended ceilings

03

Cove lighting recesses and downlight layout

04

Moisture-resistant board in wet areas

05

Cornice, coving and trim installation

06

Plaster skim, finishing coat and surface repair

THE PROCESS

How the work runs

  1. Share photos of the ceiling and wall surfaces

  2. On-site survey of height, service routes and lighting needs

  3. Written scope for frame type, board selection and lighting layout

  4. Delivery after approval, with services recorded before they are boarded over

  5. Handover after surface flatness and lighting tests

Curved gypsum ceiling with continuous hidden LED cove lighting above vertical wooden slats

Where we deliver this service

Les zones actives sont affichées clairement. Contactez-nous pour vérifier votre adresse.

How much height does a suspended ceiling take?

The loss depends on the frame type, the services passing above it and the depth of the downlights. We measure the existing height at survey and state the resulting clear height in the written scope.

Can plasterboard be used in a bathroom?

Yes, with moisture-resistant board and suitable framing. Standard board is not used in wet rooms because it softens over time.

Does cove lighting need its own circuit?

The existing lighting circuit is usually enough, but where the switching arrangement calls for a separate group, running a new circuit is added to the scope. This is settled at survey.

Related services

Parlons de votre besoin

Une réparation à planifier ou un espace à transformer ?

Envoyez les informations utiles et notre équipe vous orientera vers le bon parcours.

WhatsApp · +90 539 609 51 11Districts prioritaires actifs · Autres zones sur confirmation

WhatsApp